Free Same Day Ground Shipping For USA & Canada Orders Over $99          CALL US: +1-812-402-6350           US Toll Free:  877-402-6350

Shimano Calcutta TE DC Reels

Shimano Calcutta TE DC Reels

A longtime benchmark round reel for cranking and known for their durability, Shimano's Calcutta reels continue to be a favorite with anglers looking to fish the best. A new flagship round reel series is now part of the Shimano line-up – the Calcutta Conquest reels – combining innovative features with the Calcutta timeless design.

Calcutta TE DC Reel Specs

  • Reel Family Type: Round-Profile
  • Models Offered: 4
  • Key Feature: Digital control brake system
  • Ball Bearings: 10
  • Roller Bearings: 1
  • Maximum Drag (Lb): 8.5-10
  • Retrieve Per Crank Range (In): 23

Calcutta TE DC Reel Features

  • Digital Control (DC) system has an pre-programmed braking curve on the DC circuit board inside the reel that will help keep your bait in perfect flight.
  • Super Stopper anti-reverse uses a one-way stainless steel roller bearing that eliminates back-play. This provides the angler with instant hook setting power.
  • VBS uses centrifugal force rather than magnets to aid in controlling the cast. When turned on, the individual brake weights are forced outward at the beginning of the cast when backlashes most often occur, causing friction that reduces the speed of the spool. Once the spool speed begins to slow, the pressure with which the brake weights contact the raceway lessens, allowing the spool to continue spinning.
  • Super Free Spool was designed to eliminate friction on the spool shaft during the cast. In standard baitcasting reels, when the clutch bar is pressed down, the pinion gear is freed and actually can drag on the spool shaft creating friction that can limit the length of a cast. With SF the pinion gear is supported by a ball bearing so that when the clutch is disengaged in preparation for a cast, the pinion gear and spool shaft are kept in perfect alignment. The result is zero friction upon the spool shaft.
  • HEG consists of not only the gears, but also the frame, setplate, and handle-side sideplate. First we increased the size of the drive gear and the pinion gear to offer increased leverage and power. By using a one-piece frame that incorporates the setplate and adding a one-piece stamped sideplate, we have eliminated flex in the drive train that causes gears to bind under pressure.
  • ARB are specially treated to drastically increase the corrosion resistance of the bearing. These bearings will last at least 10 times longer than standard stainless steel ball bearings in high salinity environments.
  • CF Aluminum Cold Forge Spool These spools provide increased strength and durability over diecast aluminum or graphite spools.

There are no products matching the selection.


Contact Us

Fill out the form below or Give us a Call at

+1 (812) 402-6350